Offline离线2 online在线2.1 DEVICE SETUP设备设置2.1.1 PROCESS VAEIABLES过程变量Press压力%range百分比量程A01out模拟输出方Snsr Tempe传感器温度Static静态engr unit工程单位engr isp工程师2.1.2DIAG/SERVICE诊断和维修方订TEST DEVICE测试设备Seft自检方Statics状态LOOP TEST回路测试方方CALIBRATION校准RE-RANGE重设量程方方订Keypad input键区输入Apply values实际输入Trim analog output修整模拟输出D/A trim数/模刻度修整Scaled D/A trim数/模刻度修整万万Sensor trim传感器修整Zerotrim零点微调Press过程变量Lower sensor trim传感器下线微调Upper sensor trim传感器上线微调Sensor trim points传感器微调点Clear snsr trim清零传感器2.1.3 BASIC SETUP基本设置Tag位号Unit单位RE-RANGE重设量程方Keypad input键区输入方订Apply values实际输入Device information设备信息Transfer function变送器特性Linear线性Sp root开方Damp阻尼Low cut小信号切除Cut mode关闭模式2.1.4DETAILED SETUP详细设置2.1.4.1SENS0RS传感器万万PRES SENSOR压力传感器方%range百分比量程Press过程变量Unit单位Sensor trim传感器修整Zerotrim零点微调万Press过程变量Lower sensor trim传感器下线微调方Upper sensor trim传感器上线微调Sensor trim points传感器微调点Clear snsr trim清零传感器TEMP SENSOR温度传感器Sensor temp传感器温度Amp temp放大器温度Snsr temp unit传感器温度单位方Statics Pres sensor静态压力传感器Statics Pres静态压力Statics pres unit静态压力单位2.1.4.2 SIGNAL CONDITION信号条件Process variables过程变量文RE-RANGE重设量程Unit单位万万万